Barrel Weight: 1 lbs
Cartridge: 5.56 mm NATO
Contour: Lightweight, Pencil
Gas System Length: Mid-Length
Muzzle Threads: 1/2-28
This compact, model-specific field maintenance pack is designed for servicing combat weapons and, provide the soldier or law enforcement personnel with all the tools required to field strip, repair, and maintain weapons while on the move. Not a run-of-the-mill cleaning kit, but carefully selected, high-quality field armorer tools dedicated to working on specific weapon types, so there is no confusion and no down time spent scrounging through a large field case of loose odds and ends. Individual pouches and compartments inside the water- and abrasion-resistant, denier Cordura case keep tools secure and separated to help minimize noise that could jeopardize your mission. Quiet, #9 YKK zippers with oversize pulls make it fast and easy to get tools in and out. Front panel features clear, I.D. card sleeve and loop strip for name tape. Includes two, nylon grab handles for easy carry. Made in the U.S.A. Field Pack Case also available separately. The M16/M4 Field Pack allows complete weapon breakdown for routine maintenance and repair, plus includes tools for sight adjustments and field cleaning of the Colt M16/M4. Includes special tools for removal of barrel nut, flash hider and lower receiver extension without damage to any rifle component.
Battery Life: 5 yrs
Objective Size: 25mm
Power Supply: (1) CR 2032 Lithium battery
Reticle: 2.0 MOA Red Dot
Weight: 4.1 oz
Made in the USA
Designed in conjunction with Nodak Spud, the BRN-16A1 Lower Receiver matches the features of the original M16A1 Receiver. Perfect for a “Retro” or reproduction build, these lowers precisely mirror the original profile.
Features specific to the BRN-16A1 Lower Receiver are the proper M16A1 front takedown lug profile, and profile surrounding the receiver extension. Most forged lower receivers produced today feature “A2” profiles, which are incorrect for M16A1 reproduction builds. The lower starts off as a 7075 T6 aluminum forging, then is machined to mil-spec dimensions. Once machined, the lower is finished with a matte black hard anodized finish. This finish matches modern uppers found on the market today, as well as the Brownells M16A1 Upper Receiver sold separately.
Standard AR-15 components will work perfectly with this lower.
These receivers only have cosmetic blemishes. Expected blemishes are safety engravings on both sides of the receiver. Receivers are otherwise perfectly functional.
The Geissele 2 Stage Enhanced Trigger (B-G2S-E) provides superior control and helps accuracy while maintaining the robustness and reliability that Geissele triggers are known for. The B-G2S-E gives a smooth, light 1st stage take up of 2.3lbs and a crisp, candy-cane-like 2nd stage break of 1.2lbs. The B-G2S-E is ideal for use in precision Squad Designated Marksman type rifles where weapon accuracy and reliability are critical.
B-GRF (Geissele Rapid Fire)
The Geissele Rapid Fire Trigger (B-GRF) was developed to give semiautomatic-only rifles a glass-smooth trigger pull very similar to the Geissele Super Select Fire (SSF) trigger designed for the U.S. Special Operations Community . The B-GRF is a fast-shooting, smooth trigger ideal for 3 Gun competition and recreational shooting alike. It pulls like a single-stage, but resets like a two-stage. Two trigger springs are included so the B-GRF can be set up with a pull of either 4 lbs or 3.2 lbs. Does NOT convert semiautomatic rifles to automatic.
Hollow-Ended "Starter" Punches For Roll PinsHolds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear M16/AR-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on Sig handguns. Finish driving with roll pin punch. O/A in chart means "Overall". Available individually or as a set of 5.
The PMAG 30 AR 300 B GEN M3 is a purpose-designed magazine for rifles chambered in .300 Blackout. Since its inception, .300 Blackout shooters have had to use a magazine designed for another cartridge, limiting its performance and compatibility.
One of the nice features of .300 Blackout is the compatibility with 5.56x45mm parts, but with the magazine it is a compromise to do so. Due to the wide variety of projectile weights and shapes potentially decreasing overall reliability, a dedicated .300 Blackout magazine was a logical step for the PMAG line.
In addition to the performance gained by a dedicated mag, the PMAG 30 AR 300 B also offers a safer way to feed your .300 BLK rifle. When using 5.56 mags, the potential to chamber and fire a .300 BLK round in a 5.56 rifle with catastrophic results requires diligent ammunition management by the shooter. The PMAG 30 AR 300 B’s distinct rib design provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous cross-loading issues.
Convenient, Money-Saving 3-Paks Of Factory Mags For Popular ModelsGenuine Glock® factory magazines ensure smooth, reliable feeding and help you stay confident your pistol will perform reliably. Manufactured to Glock® specifications in Austria by Glock®. Features a round count indicator on rear face of mag body and the standard factory base plate. Also available bundled with a rugged Uncle Mike’s molded-Kydex two-mag belt pouch. Tension screw system lets you adjust the amount of retention for competition or carry. Combo available for Glock® 17/34 (9mm).